1. Fast curing(in 6-10 minutes) 2. Very high bonding strength 3. It can bond most substrates, such as metal, stone, wood, plastic, ceramic, glass, marble, etc. 4. Mixing ratio of A and B is 1:1. The mixing ratio not like epoxy adhesive, just estimate the volume of A&B by eyeballing is OK. How to use: 1. Puncture seal with the reverse of the tube cap 2. Clean the surfaces to be bonded and make the surface dry and free of dirt 3. Squeeze about equal volumn of A and B from each tube, and them mix the two component thoroughly by the mixing ratio of 1:1 (by volume) 4. Apply the mixed adhesive to the surfaces to be bonded, and then put the surfaces together and press 5. The mixed glue will cure in 3-5 minutes (under 23ºC). Once the glue cures, you can get 70% of its full bonding strength, so the bonded objects can be handled.
1 Surface to be repaired should be clear, dry and free of oil.
2 Pierce ends of tubes using cap. Squeeze equal amount ofhardener and resin from each tube and mix thoroughly until a uniform colour is achieved. Mix merely what you can use immediately.
3 Apply to surface to be repaired. Remove excess epoxy
Caution KEEP OUT OF R EACH OF CHILDREN
It may cause skin irratation. Remove with soap and water in case of skin contact. If in contact with eyes, flush with water. If swallowed, call physician immediately.
English (US)
Português
العربية